Acroprint ATR360 Top Loading Time Card Recorder with Fingerprint & Proximity Badge User Verification - Manual (Page 13)

Page 10 of 26
Set Ink Color Change Time
1. Remove top cover
2. Locate the program switch to the left of the finger print reader. Move the
switch to the down position, you are now in setup mode
3. Press P1.
a. P1,P4,P5,P6 will now be flashing
4. If this is the initial setup you must begin with 01
5. Press P6 to save
6. Press P4 or P5 to select the correct hour
7. Press P6 to save
8. Press P4 or P5 to select the correct minute
9. Press P6 to save
10. Press P4 or P5 to select the correct color
a. 01 – Black
b. 02 – Red
11. Press P6 to save
12. Deselect days by pressing P4 or P5 to highlight the day. Press P1 to deselect
the day. After P1 is pressed the day will disappear
a. 7 = Sunday, 1 = Monday….
b. To reselect the day’s press P4 or P5 until the day is flashing then press
P1
13. Press P6 to save
14. Complete steps 5-13 to complete the remaining 11 slots or to exit setup move
the program switch to the up position
Set Column Change Time Setup
1. Remove top cover
2. Locate the program switch to the left of the finger print reader. Move the
switch to the down position, you are now in setup mode
3. Press P3
a. P3, P4, P5, P6 will now be flashing
4. If this is the initial setup you must begin with 01
5. Press P6 to save
6. Press P4 or P5 to select the correct hour for the first time slot
7. Press P6 to save
8. Press P4 or P5 to select the correct column
a. Choose a column 1-6
9. Press P6 to save
10. Complete steps 4-9 until all slots are completed or to exit move the program
switch to the up position