Petzl NAVAHO BOD CROLL FAST - Manual (Page 3)

C71CFO NAVAHO BOD CROLL FAST C71503-A (011206)
Diagram 1.
Directional
maillon rapide
The maillon rapide is a component
of the harness that is used as a
connecting element to join the front
of the torso to the belt. It must
always be tightened to 3 Nm (making
unscrewing by hand impossible).
Do not use it to attach a lanyard or
energy absorber.
3,0 Nm
A
Only the techniques shown in the diagrams that are
not crossed out and/or do not display a skull and
crossbones symbol are authorized. Check our Web site
www.petzl.com regularly to find the latest versions of
these documents.
Contact PETZL if you have any doubt or difficulty
understanding these documents.
Field of application
Fall arrest harness, work positioning belt, seat
harness.
Rope access harness with integrated CROLL.
This product must not be loaded beyond its strength
rating, nor be used for any purpose other than that for
which it is designed.
WARNING
Activities involving the use of this equipment are
inherently dangerous.
You are responsible for your own actions and
decisions.
Before using this equipment, you must:
- Read and understand all instructions for use.
- Get specific training in its proper use.
- Become acquainted with its capabilities and
limitations.
- Understand and accept the risks involved.
Failure to heed any of these warnings may result in
severe injury or death.
Responsibility
WARNING, specific training is essential before use.
This product must only be used by competent and
responsible persons, or those placed under the direct
and visual control of a competent and responsible
person.
Gaining an adequate apprenticeship in appropriate
techniques and methods of protection is your own
responsibility.
You personally assume all risks and responsibilities for
all damage, injury or death which may occur during or
following incorrect use of our products in any manner
whatsoever. If you are not able, or not in a position to
assume this responsibility or to take this risk, do not
use this equipment.
Inspection, points to verify
Before each use
Harness
Check the webbing at the attachment points, at the
adjustment buckles and at the safety stitching.
Look for cuts in the webbing, wear and damage due
to use, to heat, and to contact with chemical products,
etc. Be particularly careful to check for cut threads.
Verify that the DoubleBack and FAST buckles operate
properly.
Directional maillon rapide
Before each use, check the body.
Verify that the locking nut is screwed on completely
(no threads visible) and tightened with a torque of
3 Nm.
CROLL ventral rope clamp
Before each use, check the condition of the body, the
attachment hole, the cam and the safety catch (cracks,
scoring, deformation, wear, corrosion), the cam
springs and axle. Make sure the teeth are not worn out.
Attention, do not use a rope clamp that has missing or
worn-out teeth.
During each use
It is important to regularly inspect the condition of
the product. Check its connections with the other
equipment in the system and make sure that the
various pieces of equipment in the system are correctly
positioned with respect to each other.
Consult the details of the inspection procedure to be
carried out for each item of PPE on the Web at www.
petzl.com/ppe or on the PETZL PPE CD-ROM.
Contact PETZL if there is any doubt about the condition
of this product.
B
Clic !
Diagram 2. How to put the harness on
Open the FAST buckles on the leg loops.
2A.
2A. Spread the shoulder
straps apart, grasp the
harness by the belt and slip
both feet through the leg
loops.
2B. Position the
shoulder straps on the
shoulders.
2C. Adjust the belt by pulling on the
belt straps. Stow the excess webbing
neatly using the strap retainers (flat
against the waist belt).
- Short ends: use the retainers in
front of the adjustment buckles.
- Long ends: pass them through
the lateral rings then through the
retainers behind the rings.
Go to size 2
2D. Fasten the FAST buckles and adjust the
leg loops. Be careful of foreign bodies which
can impede the operation of the FAST buckles
(such as pebbles, sand, clothing...). Check for
correct locking.
C
2B.
2C. 2D.
DoubleBack
Fast