Yamaha M7CL-32 - Manual (Page 200)

M7CL Owner’s Manual 200
6
To specify the channel on which MIDI mes-
sages will be transmitted or received, press
the channel select popup button.
The MIDI SETUP popup window for selecting the
channel will appear. Operations in this window are the
same for both transmission (Tx) and reception (Rx),
and include the following items.
1 CH field
Select CH 1–CH 16 as the channel that will be used to
transmit or receive MIDI messages.
7
Select the channel.
Use the ↑ / ↓ buttons to select an item. Press the OK but-
ton to confirm the selected channel and close the MIDI
SETUP popup window.
8
Turn transmission/reception on or off for
each MIDI message.
The M7CL lets you assign a specific event (scene recall or effect library recall) to each program
change number, so that when this event is executed on the M7CL, a program change message
of the corresponding number will be transmitted to an external device. Conversely, the corre-
sponding event can be executed when a program change message is received from an external
device.
1
Connect the M7CL to your external device.
The following illustration shows an example of using
the MIDI IN/OUT connectors to transmit and receive
MIDI messages.
2
In the function access area, press the
SETUP button to access the SETUP screen.
3
In the center of the screen, press the MIDI
button to access the MIDI popup window.
1
• Alternatively, you can select the channel by pressing the
desired channel in the field or by turning one of the multifunc-
tion encoders.
• When transmitting or received parameter changes, the chan-
nel number you specify here is used as the device number (a
number that identifies the transmitting or receiving unit).
HINT
• For details on using program changes, refer to “Using pro-
gram changes to recall scenes and library items,” below.
• For details on using control changes, refer to “Using control
changes to control parameters” ( → p. 203).
HINT
Using program changes to recall scenes and library items
M7CL
MIDI OUT MIDI IN MIDI OUT MIDI IN
external
device
MIDI button
Basic MIDI settings • Using program changes to recall scenes and library items