ZyXEL Communications ZyXEL ZyWALL IDP 10 - Manual (Page 81)

ZyWALL IDP 10 User’s Guide
Log and Report 7-5
Figure 7-4 Alarm
The following table describes the fields in this screen.
Table 7-4 Alarm
LABEL DESCRIPTION
Alarm Schedule
Active Select this field to activate your ZyWALL's alarm schedule as configured in the fields
below.
Period This field is used to configure the frequency of alarm messages. Alarm messages are
not sent instantaneously. There is a minimum wait period of five minutes between when
alarm messages are sent out.
Mail Server Type the IP address or URL of the mail server. If this field is left blank, alarms will not be
sent via e-mail. Your mail server must not request a username or password. If it does,
you must disable this first before using it to send ZyWALL alarms.
Send From Type the sender e-mail address in this field.
Recipient(s) Type up to three e-mail address(es) separated by semi-colons of people who should
receive these reports.
Subject Type a title that you want to be in the subject line of the alarm that the ZyWALL sends.
Apply Click this button to save your changes back to the ZyWALL.
Reset Click this button to begin configuring this screen afresh.