beautypg.com

General settings, Device, Chapter 3 general settings – ZyXEL Communications ZyXEL ZyWALL IDP 10 User Manual

Page 29

background image

ZyWALL IDP 10 User’s Guide

General Settings

3-1

Chapter 3

General Settings

This chapter describes how to configure the ZyWALL’s TCP, VLAN and State settings.

3.1 Device

Enter the ZyWALL IP address, subnet mask, gateway IP address and DNS server IP address in the
next screen. The gateway and DNS entries relate to the e-mail, syslog and SNMP functions of the
ZyWALL.

The DNS server maps a domain name to its corresponding IP address and vice versa. If you configure
a DNS server, you can enter an IP address or domain name for e-mail, syslog, etc. servers.

If you change the ZyWALL IP address, you will need to access it again using the new IP address. To
change your ZyWALL’s network settings click GENERAL, then the Device tab.

Figure 3-1 General: Device

The following table describes the fields in this screen.