ZyXEL Communications ZyXEL ZyWALL IDP 10 - Manual (Page 37)

ZyWALL IDP 10 User’s Guide
Remote Management 5-1
Chapter 5
Remote Management
The remote management screens allow you to which ports are allowed web and SSH access
and configure SNMP
5.1 Remote Management Overview
Remote management allows you to determine which services can access which ZyWALL interface (if
any) from which computers.
You may access your ZyWALL using web or SSH via:
LAN +
MGMT
WAN +
MGMT
MGMT ALL Disable
To disable remote management, select Disable in the Server Access field of the corresponding screen
(WWW or SSH).
Remote management over LAN or WAN will not work when
there is already another remote management session of the same
type (web or SSH) running. You may only have one remote
management session of the same type running at one time.
5.1.1 Remote Management and Stealth
If you enable Stealth on a port, you cannot perform remote management via that port.
5.2 Configuring WWW
Click Remote Management to open the following screen (WWW is the first tab) to choose a port(s)
through which you can manage the ZyWALL using the web configurator. The default (at the time of
writing) is MGMT only. If you want to begin managing the ZyWALL from another port, you will
first have to start a local console port session to change this default using the commands.
Figure 5-1 Remote Management: WWW