ZyXEL Communications ZyXEL ZyWALL IDP 10 - Manual (Page 67)

ZyWALL IDP 10 User’s Guide
IDP Policies 6-21
Figure 6-18 User-defined Policies
Table 6-6 User-defined Policies
LABEL DESCRIPTION
Enable User-
defined Policy This checkbox must be selected to have the ZyWALL check traffic using your custom
IDP rules. You may clear it to keep the rules but not have them applied to traffic.
Import User-
defined Policy Use these fields to import another person’s user-defined rules. The imported rules are in
binary format (not a text file), so they must be imported to the ZyWALL first and then
edited one by one if so desired. They cannot be edited before being imported.
File Path Save the file with the user-defined rules you want to import to your computer first. Then
type the file path and name in the text box or click Browse to find it on your computer
and finally click Import to import the file.
You can import up to a maximum of 128 rules as long as the total (pre-defined and user-
defined) number of rules does not exceed 3,000.
User-defined rules of the same name are allowed so existing rules of the same name as
imported rules will not be overwritten.
Create User-
defined Policy
User-defined
Policy This text box shows the number of user-defined rules already configured or imported in
the ZyWALL (maximum 128).
# This is the policy index number. Rule ordering is important as rules are applied in turn.
You can reorder user-defined rules using the Move button.
Edit Delete