ZyXEL Communications ZyXEL ZyWALL IDP 10 - Manual (Page 78)

ZyWALL IDP 10 User’s Guide
7-2 Log and Report
Table 7-1 View Log
LABEL DESCRIPTION
Logs
Display Select a log category from the drop down list box to display logs within the selected
category:
o All Logs (view all logs)
o System Log (view logs related with the ZyWALL such as login to the ZyWALL or
startup)
o IDP Event Log (view logs related to detected intrusions)
Clear Click this button clear all the logs.
Refresh Click this button to refresh the log screen.
Page Use the dropdown list to select the log page you want.
|| Use these buttons to navigate between first, previous, next and last pages of the logs.
# This displays the number of the log that was recorded.
Time This field displays the date and time the log was recorded.
Message This field states the reason for the log.
Source This field lists the source IP address and the port number of the packet that caused the
log.
Destination This field lists the destination IP address and the port number of the packet that caused
the log.
Action This field displays the action taken on the packet that caused the (IDP event) log.
Note This field displays additional information about the log entry.
7.2 Report
You can send logs by e-mail or send them to a syslog server.
7.2.1 E-Mail
Use the E-Mail Setup screen to configure to where and when the ZyWALL is to send logs by e-mail.
Logs may be e-mailed as soon as the log is full (see Report Schedule).
Click REPORT under the LOG & REPORT heading in the MAIN MENU of the web configurator,
and then click the E-MAIL tab.