ZyXEL Communications ZyXEL ZyWALL IDP 10 - Manual (Page 38)

ZyWALL IDP 10 User’s Guide
5-2 Remote Management
The following table describes the fields in this screen.
Table 5-1 Remote Management: WWW
LABEL DESCRIPTION
HTTP
Server Access Select the interface(s) through which a computer may access the ZyWALL using this
service. Define the rule for server access by selecting from the drop-down menu.
Options are LAN + MGMT, WAN + MGMT, MGMT, ALL and Disable.
Select Disable to prevent remote management of a service.
Secure Client IP
Address A secure client is a “trusted” computer that is allowed to communicate with the ZyWALL
using this service.
Select All to allow any computer to access the ZyWALL using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyWALL using this service.
Apply Click this button to save your changes back to the ZyWALL.
Reset Click this button to begin configuring this screen afresh.
5.3 SNMP
Simple Network Management Protocol is a protocol used for exchanging management information
between network devices. SNMP is a member of the TCP/IP protocol suite. Your ZyWALL supports
SNMP agent functionality, which allows a manager station to manage and monitor the ZyWALL
through the network. The ZyWALL supports SNMP version 2c (SNMPv2c). The next figure
illustrates an SNMP management operation.
Figure 5-2 SNMP Management Model
An SNMP managed network consists of two main types of component: agents and a manager.