ZyXEL Communications ZyXEL ZyWALL IDP 10 - Manual (Page 21)

ZyWALL IDP10 User’s Guide
Introducing the Web Configurator 2-1
Chapter 2
Introducing the Web Configurator
This chapter describes how to access the ZyWALL web configurator and provides an
overview of its screens.
2.1 Web Configurator Overview
The embedded web configurator (eWC) allows you to manage the ZyWALL from anywhere through a
browser such as Microsoft Internet Explorer or Netscape Navigator. Use Internet Explorer 6.0 and
later or Netscape Navigator 7.0 and later versions with JavaScript enabled. It is recommended that you
set your screen resolution to 1024 by 768 pixels. The screens you see in the web configurator may
vary somewhat from the ones shown in this document due to differences between individual firmware
versions.
2.2 Accessing the ZyWALL Web Configurator
1. Make sure your ZyWALL hardware is properly connected and prepare your computer/computer
network to connect to the ZyWALL (refer to the Quick Start Guide).
2. Launch your web browser and type "192.168.1.3" as the URL.
Figure 2-1 Default Web Configurator IP Address
3. Type "1234" (default) as the password and click Login. In some versions, the default password
appears automatically - if this is the case, click Login.