ZyXEL Communications ZyXEL ZyWALL IDP 10 - Manual (Page 25)

ZyWALL IDP10 User’s Guide
Introducing the Web Configurator 2-5
Table 2-2 Screens Summary
LINK TAB FUNCTION
HOME This screen shows the ZyWALL’s general device information. Use this
screen to access the setup wizard.
SYSTEM Access the GENERAL, INTERFACE and REMOTE MGMT links from
here.
GENERAL Device Use this screen to configure device TCP/IP settings and TCP idle
timeout.
VLAN Use this screen to configure the VLAN tag and VLAN ID.
State Use this screen to set the intrusion operating state (Inline, Monitor or
Bypass).
INTERFACE Link Use this screen to set each port’s speed and duplex mode.
Stealth Use this screen to enable/disable stealth on the LAN or WAN ports.
Policy Check Policy check determines the interface on which traffic will be checked
against the ZyWALL policy rules (both pre-defined and user-defined).
By selecting LAN port, then only traffic coming into the LAN and out
through the WAN will be checked. Similarly, by selecting WAN port,
then only traffic coming into the WAN and out through the LAN will be
checked.
REMOTE MGMT WWW Use this screen to configure through which interface(s) and from which
IP address(es) users can use HTTP to manage the ZyWALL.
SNMP Use this screen to configure Simple Network Management Protocol
(SNMP) ZyWALL management.
SSH Use this screen to configure through which interface(s) and from which
IP address(es) users can use Secure Shell to manage the ZyWALL.
IDP Pre-defined All pre-defined IDP policies are already stored in the ZyWALL by
default. Use this screen to see all pre-defined policies or search fro
specific ones.
Update Use this screen to set the IP address of the update server and to
schedule automatic downloading.
User-defined Use screen to create your own intrusion protection policies.
Registration Use this screen to register for IDP update server downloads.
LOG & REPORT Access the LOGS, REPORT and ALARM links from here.
LOGS View Log Use this screen to view the logs for the categories that you selected.
REPORT E-Mail Use this screen to configure and schedule e-mailed log reports.
syslog A syslog server is an external logging server used to store and parse
logs.
ALARM ALARM Use this screen to configure and set the frequency of (e-mailed) alarms.
MAINTENANCE Password Use this screen to change your password.
Time Setting Use this screen to set your ZyWALL’s time and date.
F/W Upload Use this screen to configure and schedule firmware uploads to your
ZyWALL.
Configuration Use this screen to back up, restore ZyWALL configuration settings or
reset them to the factory defaults.