Xerox 7600 - Manual (Page 35)

Scanning
30 Xerox 7600 Scanner User’s Guide
Configure Before Scan
You can set up the scanner so that, when you press a button or click it on
the Button Panel, a different scanning interface opens before the
scanning starts. To set up the scanner for this capability, you select
Configure Before Scan from the scan configuration list.
Choosing Configure Before Scan simply opens either the TWAIN or WIA
scanning interface when you press or click a button. You can then use the
interface to change the Resolution, Scan Mode, and other settings. When
you scan, the scanned image will still be sent as the file type and to the
same Destination Application already selected in the One Touch
Properties window for that button.
The option Configure Before Scan can be used when you want to scan
multiple pages and have them appear in one file.
To set Configure Before Scan:
1. Open the One Touch Properties window.
2. Click the tab of the button that you want to set to configure before
scanning.
3. Select the scan configuration Configure Before Scan.
4. Right-click on Configure Before Scan and choose an interface to
use for configuring before scanning.
TWAIN—The TWAIN Interface opens for you to make changes prior
to scanning. See “Scanning from the TWAIN Interface” on page 53.
WIA—The Windows Image Acquisition (WIA) Interface opens for you
to make changes prior to scanning. See “Scanning from the Windows
Image Acquisition Interface” on page 66.
5. Click OK or Apply on the One Touch Properties window.
Select the button.
Select Configure
Before Scan.
Right-click on
Configure Before
Scan to get the
menu, and choose
the interface to use
for scanning.