Editing or deleting scan configurations – Xerox 7600 User Manual
Page 34
Xerox 7600 Scanner User’s Guide
29
Scanning
Editing or Deleting Scan Configurations
Editing and deleting is normally for the configurations you create, not for
your scanner’s pre-set configurations.
To edit or delete a scan configuration:
1.
Open the One Touch Properties window.
2.
Select the scan configuration you want to edit or delete.
•
To delete the configuration, click the Delete button.
•
To edit the configuration, click the Edit button.
Edit the settings and click OK.
3.
Click OK to close the One Touch Properties window.
NOTE:
Your scanner comes with a number of configurations pre-set at
the factory. To ensure that your scanner will always have a set of
correct scan configurations, do not delete the pre-set configurations.
We also recommend that you keep those configurations locked so they
are not inadvertently deleted. That way, you will always have the
factory-settings available. If you do delete or edit them, and want to get
the factory pre-sets back again, you will need to uninstall then re-install
your scanner.
Select the scan
configuration to edit or
delete. It must be
unlocked, as indicated
by not having a lock
displayed here.