ZyXEL Communications ES-3148 Series - Manual (Page 66)

Chapter 5 Initial Setup Example
ES-3148 User’s Guide
66
3 Click Basic Setting > IP Setup.
4 Configure the related fields in the
IP Setup screen.
For the VLAN2 network, enter
192.168.2.1 as the IP address and
255.255.255.0 as the subnet
mask.
5 In the VID field, enter the ID of
the VLAN group to which you
want this management IP address
to belong. This is the same as the
VLAN ID you configure in the
Static VLAN screen.
6 Select the Manageable check box
to allow the Switch to be
managed from the ports
belonging to VLAN2 using this specified IP address.
7 Repeat this process for VLAN1, if necessary.
Click Add to save your changes back to the run-time memory. Settings in the run-time
memory are lost when the Switch’s power is turned off.
exa
mp
le