ZyXEL Communications ES-3148 Series - Manual (Page 56)

Chapter 4 The Web Configurator
ES-3148 User’s Guide
56
The following table describes the links in the navigation panel.
Authentication and
Accounting
RADIUS Server
Setup
TACACS+ Server
Setup
Auth and Acct
Setup
IP Source Guard
IP Source Guard
Static Binding
DHCP Snooping
DHCP Snooping
Configure
DHCP Snooping
Port Configure
DHCP Snooping
VLAN Configure
ARP Inspection
Status
ARP Inspection
VLAN Status
ARP Inspection Log
Status
ARP Inspection
Configure
ARP Inspection Port
Configure
ARP Inspection
VLAN Configure
Loopguard
Table 6 Navigation Panel Links
LINK DESCRIPTION
Basic Setting
System Info This link takes you to a screen that displays general system and hardware
monitoring information.
General Setup This link takes you to a screen where you can configure general identification
information about the Switch.
Switch Setup This link takes you to a screen where you can set up global Switch parameters
such as VLAN type, MAC address learning, GARP and priority queues.
IP Setup This link takes you to a screen where you can configure the management IP
address, subnet mask (necessary for Switch management) and DNS (domain
name server).
Port Setup This link takes you to screens where you can configure settings for individual
Switch ports.
Advanced
Application
VLAN This link takes you to screens where you can configure port-based or 802.1Q
VLAN (depending on what you configured in the Switch Setup menu). You can also
configure a protocol based VLAN or a subnet based VLAN in these screens.
Static MAC
Forwarding
This link takes you to screens where you can configure static MAC addresses for a
port. These static MAC addresses do not age out.
Table 5 Web Configurator Screen Sub-links Details (continued)
BASIC SETTING
ADVANCED
APPLICATION
IP APPLICATION MANAGEMENT