ZyXEL Communications ES-3148 Series - Manual (Page 60)

Chapter 4 The Web Configurator
ES-3148 User’s Guide
60
3 When you see the message “ Press any key to enter Debug Mode within 3
seconds ... ” press any key to enter debug mode.
4 Type atlc after the “ Enter Debug Mode ” message.
5 Wait for the “ Starting XMODEM upload ” message before activating XMODEM
upload on your terminal.
6 After a configuration file upload, type atgo to restart the Switch.
Figure 18 Resetting the Switch: Via the Console Port
The Switch is now reinitialized with a default configuration file including the default
password of “1234”.
4.7 Logging Out of the Web Configurator
Click Logout in a screen to exit the web configurator. You have to log in with your password
again after you log out. This is recommended after you finish a management session for
security reasons.
Figure 19 Web Configurator: Logout Screen
Bootbase Version: V0.6 | 03/06/2006 09:21:13
RAM:Size = 32 Mbytes
DRAM POST: Testing: 32768K OK
DRAM Test SUCCESS !
FLASH: Intel 32M
ZyNOS Version: 3.70(AID.0)b0 | 4/28/2006 17:27:36
Press any key to enter debug mode within 3 seconds.
.................................
Enter Debug Mode
Switch> atlc
Starting XMODEM upload (CRC mode)....
CCCCCCCCCCCCCCCC
Total 262144 bytes received.
Erasing..
................................................................
OK
Switch> atgo