ZyXEL Communications ES-3148 Series - Manual (Page 141)

Chapter 16 Port Authentication
ES-3148 User’s Guide
141
16.2 Port Authentication Configuration
To enable port authentication, first activate the port authentication method(s) you want to use
(both on the Switch and the port(s)) then configure the RADIUS server settings in the Auth
and Acct > Radius Server Setup screen.
Click Advanced Application > Port Authentication in the navigation panel to display the
screen as shown.
Figure 68 Advanced Application > Port Authentication
16.2.1 Activate IEEE 802.1x Security
Use this screen to activate IEEE 802.1x security. In the Port Authentication screen click
802.1x to display the configuration screen as shown.
Figure 69 Advanced Application > Port Authentication > 802.1x