Static mac forward setup, 1 overview, 2 configuring static mac forwarding – ZyXEL Communications ES-3148 Series User Manual
Page 103: Chapter 9 static mac forward setup, 1 overview 9.2 configuring static mac forwarding, Static mac forward setup (103)
ES-3148 User’s Guide
103
C
H A P T E R
9
Static MAC Forward Setup
Use these screens to configure static MAC address forwarding.
9.1 Overview
This chapter discusses how to configure forwarding rules based on MAC addresses of devices
on your network.
9.2 Configuring Static MAC Forwarding
A static MAC address is an address that has been manually entered in the MAC address table.
Static MAC addresses do not age out. When you set up static MAC address rules, you are
setting static MAC addresses for a port. This may reduce the need for broadcasting.
Static MAC address forwarding together with port security allow only computers in the MAC
address table on a port to access the Switch. See
on port security.
Click Advanced Applications > Static MAC Forwarding in the navigation panel to display
the configuration screen as shown.
Figure 43 Advanced Application > Static MAC Forwarding