Zebra Technologies EPL2 - Manual (Page 94)

P Command - Print
Description Use this command to print the contents of the
image buffer.
Syntax Pp
1
, [p
2
]
Parameters p
1
= Number of label sets.
Range = 1 to 65535
p
2
= Number of copies of each label (used in
combination with counters to print mul-
tiple copies of the same label).
Range = 1 to 65535
The P command cannot be used inside of a stored
form sequence. For automatic printing of stored
forms, use the PA command.
Examples: P1↵ :prints one label set
P2,1↵ :prints 2 label sets of one label each
P5,2↵ :prints 5 label sets of 2 labels each
3-76
980352-001 Rev.A