Zebra Technologies EPL2 - Manual (Page 67)

GK Command - Delete Graphics
Description Use this command to delete graphics from
memory.
Syntax GK {“NAME”|"*"}
Parameters “NAME” = By entering the name of a
graphic, that graphic will be deleted
from memory.
· Graphic names stored by the printer are case
sensitive and will be stored exactly as entered
with the GM command line; i.e. “LOGO1” ,
“logo1” and “LoGo1” are three different
graphics when stored into the printer or when
retrieved by the user.
· Deleting a single graphic requires that the
GK”FORMNAME” command string be is-
sued twice for each form deleted. Some label
generation programs re-issue graphics
(graphic delete and store) every time a label is
printed which will reduce flash memory life.
“*” = By including an “*” (wild card), ALL
graphics will be deleted from memory.
The GK”*” does not need to be issued
twice to delete all graphics.
Example: GK"LOGO"↵ :deletes graphic “LOGO”
GK"LOGO"↵ :second delete graphic “LOGO” required
:for flash printers.
GK"*"↵ :deletes all graphics
980352-001 Rev.A
3-49