Fk - delete form 3-43, Command - delete form -43 – Zebra Technologies EPL2 User Manual

Page 61

FK Command - Delete Form

Description This command is used to delete forms from

memory.

Syntax

[

"FORMNAME"

"*"

]

Parameters

“FORMNAME”

= By entering the name of a

form, that form will be deleted from

memory.

The name may be up to 8 characters long.

Form names stored by the printer are case

sensitive and will be stored exactly as entered

on the

command line; i.e.

“FORM1”

“form1”

and

“FoRm1”

are three different

forms when stored into the printer or when re-

trieved by the user.

Deleting a single form requires the

FK”FORMNAME”

be issued twice for each

form to be deleted. Some label generation

programs re-issue forms (form delete and

store) every time a label is printed which re-

duces flash memory life.

“*”

= By including an “*” (wild card), ALL

forms will be deleted from memory. The

FK”*”

does not need to be issued twice

to delete all forms.

Example:

FK"AFORM"

:deletes form “AFORM”

FK"AFORM"

:second delete form “AFORM” required

:for flash printers

FK"*"

:deletes all forms

3-43

980329-001 Rev.A