Zebra Technologies EPL2 - Manual (Page 111)

UE Command - External Font Information Inquiry
Description This command will cause the printer to send in-
formation about external fonts currently stored
in the printer back to the host.
Syntax UE
The printer will send the number of external
fonts stored and each font’s name, height and
direction, to the host through the RS-232 port.
Example: UE ¿
Will Produce: ### :number of external fonts
A,xxx,y :first font
... :A=fontname
... :xxx=font height in dots
... :y=direction (0=0°, 1=90°, 2=both)
A,xxx,y :last font
980352-001 Rev.A
3-93