Zebra Technologies EPL2 - Manual (Page 79)

M Command - Memory Allocation
Description This command no longer changes memory allo-
cation. It was originally used for SRAM and
early model flash printers. The command now
allows the programmer to set the size of forms
memory only. The reminder of the storage
memory will be shared by soft fonts and graph-
ics data.
Syntax Mp
1
, p
2
, p
3
Parameters p
1
= Parameter ignored, but required to pro-
cess. Represents Image buffer size in
whole KBytes.
p
2
= Form(s) memory size in whole KBytes.
The parameter, p
2
(form memory size),
inversely effects the size of the shared
graphics/soft fonts memory.
p
3
= Parameter ignored, but required to pro-
cess. Graphics (and soft font) memory
size in whole Kbytes.
If the M command is issued, then all three pa-
rameters must be present.
Available memory and the current allocation of
memory can be displayed with the U command or
an AutoSense procedure, see the printer user’s man-
ual for details.
980352-001 Rev.A
3-61