Zebra Technologies EPL2 - Manual (Page 86)

oM Command - Disable Initial Esc Sequence Feed
Description This command disables the automatic label cal-
ibration routine executed by the printer upon
receiving the first escape command sequence
from the Windows printer driver. The printer
normally measures a single label and sets the
top of form prior to printing the first label after a
power-up reset. The Windows™ printer driver
issues escape sequences when printing.
This command’s primary use is to save
preprinted forms such as serialized labels, tags
or tickets.
Syntax oM
This command must be issued prior to printing
with the Windows driver’s or any other Escape
(esc) mode printing operation.
To reinitialize label calibration, issue a
o (111
dec. or 6F hex.) command.
3-68
980352-001 Rev.A