Xerox Phaser 3635 - Manual (Page 165)

10 Paper and other Media
Xerox Phaser 3635 User Guide 159
The paper trays can
hold a maximum of 520
sheets of 20 lb (80 g/m²)
bond paper.
3. If necessary, open the back of the paper tray to allow for paper sizes such as
Legal, Oficio and Folio. Adjust the rear guide.
4. Fan the paper and insert it into the tray. If loading Letterhead, ensure the
design is face-up and the top edge of the sheet is placed at the right side.
CAUTION: Do not fill above the Maximum Fill Line.
5. Position the side guide by squeezing the
lever and sliding it towards the stack of
paper, until it gently touches the side of
the stack. Do not allow the guide to
press against the edge of the paper
tightly.
6. Press the tray down into place.
7. Insert the paper tray.
When printing from
your PC, ensure you select
the Select Paper button
to specify the correct
paper size, color and type.
Not confirming the paper
details may result in
printing delays.
8. The UI screen shows the current paper supply settings for Tray 1 on the left
hand side. Press the Size button and/or the Type or Color button to change
the settings if necessary. If the settings are correct, press the Confirm button.
Side Paper Guide