Loading paper, Preparing paper for loading, Loading the paper trays – Xerox Phaser 3635 User Manual

Page 164

Paper and other Media

158

Xerox Phaser 3635 User Guide

Loading Paper

Preparing Paper for Loading

Before loading paper into the paper trays, fan the edges. This procedure separates
any sheets of paper that are stuck together and reduces the possibility of paper
jams.

NOTE:

To avoid unnecessary paper jams and misfeeds do not remove paper from

its packaging until required.

Loading the Paper Trays

Using the instructions provided below, load paper into the machine. Up to three
paper trays are available, depending on your machine configuration.

To load paper, carefully pull out the paper tray.

NOTE:

Take care not to let the tray fall when removing it from the device.

Adjust the rear paper guide to the required paper
length. It is preset to A4 or Letter size depending on
country. To load another size, squeeze the rear
guide and move from the current position and into
the required position. The guides should be neither
too loose, nor too tight.

Rear Paper
Guide

Side Paper
Guide