Xerox Phaser 3635 - Manual (Page 14)

1 Welcome
8 Xerox Phaser 3635 User Guide
• Never remove covers or guards that are fastened with screws. There are no
operator serviceable areas within these covers.
• Never locate the machine near a radiator or any other heat source.
• Never push objects of any kind into the ventilation openings.
• Never override or "cheat" any of the electrical or mechanical interlock devices.
• Never place this equipment where people might step on or trip on the power
cord.
• This equipment should not be placed in a room unless proper ventilation is
provided. Please contact your local Authorized dealer for further information.
Electrical Safety Information
1. The power receptacle for the machine must meet the requirements stated on
the data plate on the rear of the machine. If you are not sure that your
electrical supply meets the requirements, please consult your local power
company or an electrician for advice.
2. The socket outlet shall be installed near the equipment and shall be easily
accessible.
3. Use the power cable that is supplied with your machine. Do not use an
extension cord or remove or modify the power cord plug.
4. Plug the power cable directly into a correctly grounded electrical outlet. If you
are not sure whether or not an outlet is correctly grounded, consult an
electrician.
5. Do not use an adapter to connect any Xerox equipment to an electrical outlet
that lacks a ground connection terminal.
6. Do not place this equipment where people might step or trip on the power
cable.
7. Do not place objects on the power cable.
8. Do not override or disable electrical or mechanical interlock devices.
9. Do not push objects into slots or openings on the machine. Electrical shock or
fire may result.
10. Do not obstruct ventilation openings. These openings are used to provide
proper cooling to the Xerox machine.
Electrical Supply
1. This product shall be operated from the type of electrical supply indicted on
the product's data plate label. If you are not sure that your electrical supply
meets the requirements, please consult a licensed electrician for advice.
WARNING: This equipment must be connected to a protective earth circuit.
This equipment is supplied with a plug that has a protective earth pin. This plug