Xerox WORKCENTRE XE SERIES XE62 - Manual (Page 48)

39
Repacking the WorkCentre
Storage/Transportation
When you pack the WorkCentre away for storage or transportation, follow
the instructions given below to ensure that the WorkCentre will not get
damaged. Use the original box and packing materials.
1. Turn off the power switch and disconnect the power cord.
2. Open the front door.
Be careful not to let any toner spill out of the toner cartridge
during removal.
3. Remove the toner cartridge. (Refer to Replacing the Toner Cartridge.)
4. Close the front door.
5. Insert the shipping screw stored in the plastic insert in the right hand
side of the front door.
6. Push in the paper tray extension (if in use), remove any paper from the
tray and remove the tray.
7. Store the IEEE-1284 parallel cable and the power cord.
Service
It is important that you speak with a service representative to resolve any
persistent problem. The service representative will direct you as to what
action must be taken.
The WorkCentre cannot be shipped for service without the authorization of
a service representative.
Visit the Xerox Web site at: http://www.teamxrx.com
or call our experts at:1 – 800 – TEAM – XRX (1 – 800 – 832 – 6979)