Xerox WORKCENTRE XE SERIES XE62 - Manual (Page 44)

35
Properties Tabs
The WorkCentre XE Printer Driver Properties dialog contains four tabs from
which you can make selections that best suits your printing requirements.
Below is a brief description of each tab.
NOTE: Refer to On-line Help for detailed information.
Paper/Output — to select desired paper source (tray), number of copies,
paper size, document orientation (portrait or landscape), image shift, and
output collation.
Image Quality — to change the output type (Normal, Photograph, Text,
Advanced), Lighten/Darken, contrast and resolution.
DOS Emulation — to configure the host-based DOS emulation control
parameters. This is used to support printing for DOS applications running in
a Windows environment.
About — to display the driver version and copyright information.
On-Line Help
The WorkCentre XE Series Printer Driver includes a comprehensive on-line
help system, designed to answer all your questions about using the Xerox
WorkCentre XE Properties dialog.
The help system is your on-line user guide, providing complete introductory
and reference information. It also provides troubleshooting information, in
case you should run into any problems.
When you have a question simply click on the Help button on the Xerox
WorkCentre XE Properties dialog.
The main Help Topics window will be displayed.
?
Printer Driver Help (Windows 95, 98 and NT)
To view an explanation of any field or button in the dialog window:
1. Click the ? icon located in the upper right corner of the dialog window,
and release the mouse button.
• The cursor will change to a question mark.
2. Place the question mark on the field or button that you want defined, and
release the mouse button.
• The on-line Help file will display information on the selected subject.