Xerox WORKCENTRE XE SERIES XE62 - Manual (Page 20)

11
Copying/Printing
Selecting Media
Paper Specifications
Paper Storage
For reliable WorkCentre operation and good copy/print quality, Xerox
recommends that paper be stored:
• on a flat surface.
• in a closed container.
• in a low humidity area.
• tightly wrapped, if the ream is partially used.
NOTE: Paper affected by humidity, and curled paper can cause jams and
copy/print quality problems.
The Specifications Chart below gives you information about the types of
paper that can be used at the paper input area.
Paper Input Paper Tray
Paper Sizes 3 7/8 x 5 7/8 to 8 ½ x 14” (98 to 216 x
315/330 mm)
Paper Weights
Optimum
Range
20 lb / 80 g/m²
14 – 34 lb
52 – 130 g/m²
Paper Capacities
Copy, letterhead, and
predrilled
20 lb / 80 g/m² - 250 sheets
Labels and
Transparencies * Yes (1 at a time)
Envelope COM-10 (4.1 x 9.5” / 216 x 279mm)
Monarch (3.87 x 7.5” / 98.5 x 191 mm)
C5 (6.4 x 9.16” / 162 x 229mm)
DL (4.4 x 8.8” / 110 x 220mm)
* Use labels and transparencies specifically designed for copiers (high
temperatures).