Xerox WORKCENTRE XE SERIES XE62 - Manual (Page 31)

22
Auto Clear
This copier is enabled at the factory to return to the Normal Copy mode
approximately one minute after a job is completed. Unless otherwise
programmed, the Normal Copy settings are as follows:
•
Copy Quality – Auto
•
Copy lighter/darker – Normal
•
Priority Magnification – 100%
•
Quantity Selected – 1
NOTE: Time periods for the Power Shut-Off, Power Save, and Auto Clear
can be modified to meet your specific copying needs. Refer to Customizing
Your WorkCentre section of this User Guide for information about changing
these settings.