Xerox WORKCENTRE XE SERIES XE62 - Manual (Page 15)

6
Installing the Toner Cartridge
1. Remove the toner cartridge from its
bag, unwrap the tape and remove the
protective cover.
PUSH
2. Shake the toner cartridge four to five
times to distribute the toner evenly
inside the reservoir.
3. Hold the handle of the toner cartridge
(which locks in place) so that the
stamped markings are facing upward.
In the future, when the toner cartridge
has to be removed from the
WorkCentre, lay it on a paper with the
stamped markings down. The
cartridge may leave a line of toner on
the surface if laid with the stamped
markings up.