Xerox WORKCENTRE XE SERIES XE62 - Manual (Page 28)

19
Programmable Features Chart (continued)
Program
Number Program Option Number and Option
(default is in bold)
6 Copy Contrast Adjustment:
The copy contrast range
may be adjusted when the
copy image is consistently
too light or too dark. 0 — Lightest:-4
1 — -3
2 — -2
3 — -1
4 — Nominal
5— +1
6— +2
7— +3
8— Darkest:+4
7 Paper Trail Edge Void (4
mm)
: The trail edge deletion
can be turned off to
accommodate originals that
have print to the very bottom
edge. When Off, another 4
mm will copy, however the
image quality may
deteriorate as it gets closer
to the bottom edge.
0 - On
1 - Off
10 Zoom R/E Preset
50-200% in 1% increments
(default: 50%)
14 Return to Print Mode time-
out (XE80, XE82 only) 0 —1 minute
1 — 1.5 minutes
2 — 2 minutes
3 — 2.5 minutes
4 — 3 minutes
5 — Off, infinite time out
15
During long runs with narrow
paper (5.5 inches wide and
narrower), toner may
accumulate on the machine
rollers. Use this function to
maintain clean transfer rolls.
Turning this option on will
delete all printing between
5.5 and 8.5 inches wide. A4
and letter size width papers
will be unaffected. 0 –Off
1 - On