Yamaha 9000 Pro - Manual (Page 77)

The Multi Pads
Reference 77
The Multi Pads
Quick Guide
on page 34
This section explains two important functions of the Multi Pads that are not covered in the “Quick Guide.”
For basic information on using the Multi Pads, refer to page 34 in the “Quick Guide.”
Turning Chord Match and Repeat On/Off
■ Repeat
Unless the Repeat function is on for the selected pad, playback will end automatically
as soon as the end of the phrase is reached. A phrase can be stopped while it is playing
by pressing the MULTI PAD [STOP] button.
■ Chord Match
If a Multi Pad is played while Auto Accompaniment is playing and the Chord Match
function for that pad is ON, the phrase will be automatically re-harmonized to match
the accompaniment chords.
Since all Multi Pad data is stored to Flash ROM, all of the factory programmed Multi Pad banks will be replaced by your
new settings. If you've deleted the factory-set data, you can use the Restore function (page 154) to load a copy of it from
the included disks (page 6).
For details about Flash ROM, refer to “Memory Structure” on page 54.
CAUTION
The Repeat and Chord Match settings for the Multi Pads are stored together in a group of 58 banks. For this rea-
son, you should be careful when making edits and storing your edits, since all 58 banks will be overwritten with
the new data.
STOP
1 2
3 4
M.PAD BANK 1~60
BANK VIEW
Turn Repeat of each pad On or Off.
Use the same operation to turn
Chord Match On/Off.
Press the [+]/[-] buttons
simultaneously.
Select “REPEAT” or
“CHORD MATCH.”
Select a Bank.
Select this to store
the settings. (Refer
to the “CAUTION”
note below.)
• Bank #59 (factory preset) of
the Multi Pads can be used to
send various MIDI messages.
This convenient feature lets
you control the following MIDI
functions of an external device
by simply pressing the appro-
priate Multi Pad.
Pad 1 All Note Off
Pad 2 Reset All Controllers
Pad 3 Start(FA)
Pad 4 Stop(FC)
• These MIDI messages are out-
put via the MIDI OUT B termi-
nal and are unaffected by the
MIDI Transmit settings (page
175).
• Bank #60 (factory preset) of
the Multi Pads can be used to
call up various settings of the
Scale Tuning feature (page
158). This lets you change the
tuning of the individual notes
by simply pressing the appro-
priate Multi Pad.
BANK 01
1 2
3 4
Multi Pad banks
60 banks in Flash ROM
All banks can be replaced by the
new created pad data.
75