ZyXEL Communications Prestige 642 - Manual (Page 123)

Prestige 642 ADSL Internet Access Router
3-6 Internet Access
Figure 3-5 Menu 3.2 – TCP/IP and DHCP Ethernet Setup
Follow the instructions in the following table on how to configure the DHCP fields.
Table 3-1 DHCP Ethernet Setup Menu Fields
Field Description Example
DHCP Setup
DHCP= If it is set to Server, your Prestige can assign IP addresses, an
IP default gateway and DNS servers to Windows 95, Windows
NT and other systems that support the DHCP client. If set to
None, the DHCP server will be disabled. If set to Relay, the
Prestige acts as a surrogate DHCP server and relays DHCP
requests and responses between the remote server and the
clients. Enter the IP address of the actual, remote DHCP server
in the Remote DHCP Server in this case.
When DHCP is used, the following items need to be set:
None
Server (default)
Relay
Client IP Pool Starting
Address
This field specifies the first of the contiguous addresses in the
IP address pool. 192.168.1.33
Size of Client IP Pool This field specifies the size, or count, of the IP address pool. 32
Primary DNS Server
Secondary DNS
Server
Enter the IP addresses of the DNS servers. The DNS servers
are passed to the DHCP clients along with the IP address and
the subnet mask.
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP Setup:
DHCP= Server
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.68.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
IP Policies=
Edit IP Alias= No
Enter here to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.
First address
in the IP Pool
Size of the IP
Pool
IP addresses
of the DNS
servers
This is the IP
address of the
Prestige.