ZyXEL Communications Prestige 642 - Manual (Page 122)

Prestige 642 ADSL Internet Access Router
Internet Access 3-5
Figure 3-2 Physical Network О О О О Figure 3-3 Partitioned Logical Networks
Use menu 3.2.1 to configure IP Alias on your Prestige.
3.7 Route IP Setup
The first step is to enable the IP routing in Menu 1 - General Setup.
To edit Menu 1, enter 1 in the Main Menu to select General Setup and press [ENTER]. Set the Route IP
field to Yes by pressing the space bar.
Figure 3-4 Menu 1 – General Setup
3.8 TCP/IP Ethernet Setup and DHCP
You will now use Menu 3.2 to configure your Prestige for TCP/IP.
To edit Menu 3.2, enter 3 to open the Menu 3 - Ethernet Setup from the Main Menu. When Menu 3
appears, select the submenu option TCP/IP and DHCP Setup and press [ENTER]
. The screen now displays
Menu 3.2 - TCP/IP and DHCP Ethernet Setup , as shown next .
Menu 1 - General Setup
System Name= P642
Location= location
Contact Person's Name= name
Route IP= Yes
Route IPX= No
Bridge= No
Press ENTER to Confirm or ESC to Cancel: