ZyXEL Communications Prestige 642 - Manual (Page 100)

Prestige 642 ADSL Internet Access Router
Bridging Setup 7-5
The following table describes the Bridge Static Route Menu.
Table 7-3 Bridge Static Route Menu Fields
Field Description
Route Name Enter a name for the bridge static route for identification purposes.
Active Activate/deactivate the static route.
Ether Address Enter the MAC address of the destination machine that you wish to
bridge the packets to.
IP Address If available, enter the IP address of the destination machine that you
wish to bridge the packets to.
Gateway Node Enter the number of the remote node that is the gateway of this static
route.
Once you have completed filling in this menu, press [ENTER] at the message [Press
ENTER to Confirm…] to save your configuration, or press [Esc] to cancel.