Toshiba GA-1121 - Manual (Page 51)

2
2-15 Using the EFI Densitometer ED-100
Calibrating the GA-1121 with the ED-100
You can use ColorWise Pro Tools in conjunction with the ED-100 to calibrate the
GA-1121.
T O CALIBRATE THE GA-1121 USING THE ED-100
1. Start Calibrator.
For instructions on starting Calibrator, see page 2-6 .
2. Choose EFI Densitometer ED-100 as the measurement method.
3. In the Check Print Settings pane, choose the desired calibration set.
Choose the appropriate calibration set for the type of media you will use most often.
N OTE : For this calibration to take effect, the calibration set must be associated with one
or more output profiles. There is no need to make any new associations for the default
calibration set, since it is already associated with the default output profile.
4. In the Generate Measurement Page pane, click Print.
The Print Options dialog box appears.
5. Choose the appropriate options and click Print.
For Page Type, choose 21 Sorted Patches. Sorted patches are printed on the page in the
order of their hue and saturation levels.
Paper Size is automatically set to LTR/A4 for 21 Patches.
For Input Tray, specify the paper source for printing the measurement page.