Op eration – Trimble Outdoors 5700 User Manual
Page 85
5700 GPS Receiver User Guide
6 9
Software Utilities
6
Op
eration
4.
Transfer this application file to the receiver.
5.
Check that the receiver is using the transferred application file.
To create and save an application file to the receiver:
1.
To start the Configuration Toolbox software, click
,
then select Programs / Trimble / Configuration
Toolbox / Configuration Toolbox.
2.
Select File / New / 5700.
3.
Specify the receiver settings (for specific information, refer to
the Configuration Toolbox documentation).
4.
Use File / Save As to save the application file.