Trimble Outdoors 5700 - Manual (Page 50)

2 Setting up the Receiver
3 4 5700 GPS Receiver User Guide
Op
eration
2.7.4
CompactFlash Cards
The 5700 receiver logs data internally on CompactFlash cards.
However, it only supports Type I CompactFlash cards. Trimble
recommends that you use industrial-rated CompactFlash cards, as
normal cards may limit the effective operating temperature of the
receiver.
Before logging data to a CompactFlash card, format the card to ensure
the integrity of the file system. To format the card, insert it in 5700
receiver and then hold down
p for 30 seconds.
Note – To enable this functionality, the card must be formatted while
in the receiver. Formatting the card while it is connected to a PC will
not enable this functionality.
When inserting the card into the card slot, make sure that the card
slides into the slot properly.
C
Warning – If the card does not seat into the pins correctly, do not use
force. Remove the card and reinsert it.