Appl icatio ns – Trimble Outdoors 5700 User Manual
Page 101
5700 GPS Receiver User Guide
8 5
Static and FastStatic Surveying
7
Appl
icatio
ns
3.
Do one of the following:
–
If the Trimble Survey Controller software is being used to
start the survey, follow the guidelines in the Trimble Survey
Controller Reference Manual.
–
Press
p on the 5700 receiver and wait until the red SV
Tracking LED starts flashing slowly.
4.
On the 5700 receiver, press
d.
5.
Logging begins, and the Logging/Memory LED lights up.
6.
In a FastStatic survey, the Logging/Memory LED starts flashing
slowly when enough data has been collected.
7.
When you have collected enough data for your application, hold
down
d for 2 seconds to stop logging.
8.
Hold down
p for 2 seconds to turn the receiver off.