Trimble Outdoors 5700 - Manual (Page 45)

5700 GPS Receiver User Guide 2 9
Setting up the Receiver 2
Op
eration
Figure 2.13 Connecting an external radio
5. Connect an external power source to Port 2 on the receiver.
Note – If you are using an external power source to power both
the 5700 receiver and an external radio, you must enable power
output on Port 3 and ensure that sufficient power is supplied to
power both the receiver and the radio.
Alternatively, if the radio supports it, you can apply external
power directly to the radio.
2 3
t
to antenna
to power supply