Trimble Outdoors 5700 - Manual (Page 83)

5700 GPS Receiver User Guide 6 7
Software Utilities 6
Op
eration
6.2.2
Configuring the 5700 Receiver
To configure a 5700 receiver using the GPS Configurator software:
1. Connect Port 1, 2, or 3 on the receiver to a serial (COM) port on
the computer and apply power.
2. To start the GPS Configurator software, click , then
select Programs / Trimble / GPS Configurator / GPS
Configurator.
The software automatically establishes a connection with the
5700 receiver.
3. Make appropriate selections for your required receiver settings.
For more information, refer to the GPS Configurator Help.
4. Click Apply .
The settings in the GPS Configurator software are applied to the
receiver.