Trimble Outdoors 5700 - Manual (Page 56)

3 General Operation
4 0 5700 GPS Receiver User Guide
Op
eration
3.3.4
Battery 1 LED and Battery 2 LED
The Battery LEDs inside the two Battery icons indicate the status
of the two internal batteries, or the power sources connected on Ports 2
and 3.
By default, each battery LED indicates the status of the external power
source on the corresponding port. If no external source is detected,
each LED indicates the status of an internal battery. The color of the
LED indicates whether the power source is currently in use (green) or
is on standby (yellow).
3.4
Starting and Stopping the Receiver
To turn on the receiver, press
p.
To turn off the receiver, hold down
p for two seconds.
Color Meaning Behavior Meaning
Green Power source
is in use On Healthy
Fast flash Low power
Off No power source is present
Yellow Power source
is on standby On Healthy
Fast flash Low power
Flash Dead
Off No power source is present