2 closing the netdirector console kvm, 3 lcd osd (on-screen display) configuration, Basic operation – Tripp Lite B020-016-17 User Manual
Page 11
11
5. Basic operation
(Continued)
5.2 Closing the NetDirector Console KVM
To slide the console module back in, close the cover and do
the following:
Pull the safety catches on the unit’s side rails toward you
1.
and push the module in until it stops.
Release the catches; pull the module slightly toward you;
2.
then push it all the way in.
Note: The reason for the two-step procedure is to minimize the chances of
pinching your fingers when sliding the module in.
The LCD oSD allows you to set up and
configure the LCD display:
To open up the LCD OSD main menu, press the
•
button marked Menu.
Use the
•
| and | buttons to navigate and make
adjustments. After navigating to a setting choice, use
the Menu button to bring up the adjustment screen.
When making adjustments,
•
| increases the value;
| decreases the value.
When satisfied, press
•
Exit
to return to the OSD main
menu.
When all adjustments have been made, press
•
Exit
to
close the LCD OSD.
5.3 LCD oSD (on-Screen Display) Configuration
The following is an explanation of the settings:
Auto Adjust
Automatically configures all the settings for the LCD panel to the levels the OSD
considers optimal.
Brightness
Adjusts the background black level of the screen image.
Contrast
Adjusts the foreground white level of the screen image.
Phase
Adjusts the vertical size of the screen image.
Clock
Adjusts the horizontal size of the screen image.
H-Position
Positions the display area on the LCD panel horizontally (moves the display area left
or right).
V-Position
Positions the display area on the LCD panel vertically (moves the display area up or
down).
Color
Adjustment
Adjusts the color quality of the display. You can adjust the “warmth” value, color
balance, etc. Has a further submenu to allow the fine-tuning of the RGB values.
Language
Selects the language that the OSD displays its menus in (English, French, Spanish,
German, Italian).
Recall
Returns the adjustments on all menus and submenus to their factory default settings.
Exit
|
|
Menu
m
m
m
m