Tektronix Phasershare Printer User Manual
Page 65
Setting the Printer’s IP Addressing Parameters
8
Setup Guide
59
d.
Press
Increment
to set the left-most digit of the address.
e.
Press
Shift
to advance to the next digit. Press
Increment
to set
this digit.
f.
Use
Shift
and
Increment
as described in Step e to set the
remaining digits.
g.
When the address is correctly set, press
Select
to enter your
settings into the printer; the front panel displays:
Confirm Selection
Confirm
h.
Press
Confirm
; the front panel briefly displays
Selected
, then
displays the IP address again. The IP address is now set in the
printer.
i.
Press
Exit
to return to the menu of IP addressing parameters.
5.
To set the network mask:
a.
Press
---->
until
Network Mask
is displayed.
b.
Press
Menu
; the front panel displays the network mask.
c.
Use
Increment
and
Shift
as described in Step 4d through 4f to
set the network mask.
d.
When the network mask is set, use
Select
and
Confirm
as
described in Steps 4g and 4h to enter the network mask into the
printer.
e.
Press
Exit
to return to the menu of IP addressing parameters.
6.
To set the gateway address:
a.
Press
---->
until
Gateway Address
is displayed.
b.
Press
Menu
; the front panel displays the gateway address.
c.
Use
Increment
and
Shift
as described in 4d through 4f to set
the gateway address.
d.
When the gateway address is set, use
Select
and
Confirm
as
described in Steps 4g and 4h to enter the gateway address into the
printer.