Tektronix Phasershare Printer User Manual
Page 19
Connecting Your Printer to a Network
2
Setup Guide
13
5.
Return the printer to normal operation:
a.
Press
Exit
until the front panel displays
Network Settings
.
b.
Press
Exit
again.
■
If you have changed any parameters that require a printer reset
to take effect, you will be prompted to reset the printer. If you
press
Reset
, the printer resets. If you press
Resume
, the front
panel displays
Network Settings
. Press
Exit
; the printer
returns to normal operation, but the changes you have made
will not take effect until the next time the printer is reset.
■
If you have not changed any parameters that require a printer
reset to take effect, the front panel displays
Ready
.
Setting Frame Routing from the Phaser 780 front panel
When the Token Ring card is installed in the printer, you can set the Frame
Routing from the printer’s front panel. The choices are Transparent (no source
routing) or Source Route (use source routing).
1.
While
Ready
is displayed, press
Select
; the
Printer
menu is
displayed:
Printer Menu
Help Pages Menu
2.
Press
or
until the front panel displays
Network
Settings
.
Printer Menu
Network Settings Menu
3.
Press
Menu
to enter the
Network Settings
menu; the front panel
displays:
Network Settings
Token Ring Menu
4.
Press
Menu
again; the front panel displays the first of two Frame
Routing choices.