Tektronix Phasershare Printer - Manual (Page 18)

2
Connecting Your Printer to a Network
12 PhaserShare Networking
Token Ring configuration
You can set the Token Ring Frame Routing from the printer’s front panel. When
you have the Frame Routing set, you may want to set other Token Ring
parameters. See “Configuring Token Ring parameters” on page 16. See the table
“Token Ring parameters” on page 15 for a list of Token Ring parameters.
Setting Frame Routing from the Phaser 740 and 360 front panels
N O T E
If you are attempting to perform any front panel procedure and you don’t see
the expected menu choices, the front panel may be locked. For information on
how to unlock it, see the
PhaserShare Networking Manual on the printer’s
CD-ROM.
1. Press Menu ; the front panel displays Help Pages .
2. Press ----> or <---- until the front panel displays Network
Settings .
3. Access the Frame Routing menu:
a. Press Menu until the front panel displays Token Ring .
b. Press Menu ; the front panel displays the first of two Frame Routing
choices.
4. Select the desired Frame Routing: Transparent or Source Route :
a. Press ----> until the Frame Routing choice you want is displayed.
b. Press OK to enter your choice into the printer; the front panel
briefly displays Selected , then returns to the Token Ring
display.
N O T E
When you are in the menu, if the front panel is not used for 5 minutes, the
printer returns to the Ready state.