Tektronix Phasershare Printer - Manual (Page 35)

Novell NetWare Configuration 4
Setup Guide 29
5. Return the printer to normal operation:
a. Press ( Exit ) until the front panel displays Network Settings .
b. Press ( Exit ) again.
■ If you have changed any parameters that require a printer reset
to take effect, you are prompted to reset the printer. If you press
Reset , the printer resets. If you press Resume , the front panel
displays Network Settings . Press ( Exit ); the printer
returns to normal operation, but the changes you have made do
take effect until the next time the printer is reset.
■
If you have not changed any parameters that require a printer
reset to take effect, the front panel displays
Ready .
Setting IPX frame types: Phaser 780 printer
1. Enter the Network Settings menu:
a. While Ready is displayed, press Select ; the Printer menu is
displayed:
Printer Menu
Help Pages Menu
b. Press or until the front panel displays Network
Settings .
Printer Menu
Network Settings Menu
c. Press Menu to enter the Network Settings menu; Network
Settings appears on the top line of the display .
2. Access the menu of frame types:
a. Press until the front panel displays NetWare .
b. Press Menu ; the front panel displays Interface .
c. Press until the front panel displays IPX Frame Type .
d. Press Menu ; the front panel displays the first in a menu of frame types.