Tektronix Phasershare Printer - Manual (Page 49)

Setup Guide 43
Chapter
7
Windows NT
The procedures in this chapter are valid for Windows NT version 3.x and 4.x.
For information about driver installation for later versions of Windows NT, visit
the Tektronix web site:
www.tek.com/Color_Printers/support
Setting the printer’s IP address
Set the printer’s IP address by any of the methods described in Chapter 8,
“Setting the Printer’s IP Addressing Parameters”.
Adding a Windows NT 4.0 driver on a Windows NT 4.0 server
or workstation
The Windows NT 4.0 PostScript driver is a PPD-based driver. Follow these
instructions to add or update the Tektronix Phaser PPD file for use with
Windows NT 4.0. Adding this support gives your printer access to Tektronix
page sizes, tray selection, TekColor color corrections, and resident fonts.
This update procedure provides printer page-size information for Windows NT
applications. These instructions assume a basic familiarity with Windows NT
operation and terminology. For additional information about Windows NT,
refer to your Microsoft Windows NT documentation.
N O T E
You may need the Windows NT 4.0 CD-ROM or diskettes to complete this
procedure.